Netgear XSM7224S User Manual Page 367

  • Download
  • Add to my manuals
  • Print
  • Page
    / 579
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 366
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Utility Commands 6-43
v1.0, November 2010
no hardware-address
This command removes the hardware address of the DHCP client.
host
This command specifies the IP address and network mask for a manual binding to a DHCP client.
Address and Mask are valid IP addresses; each made up of four decimal bytes ranging from 0 to
255. IP address 0.0.0.0 is invalid. The prefix-length is an integer from 0 to 32.
no host
This command removes the IP address of the DHCP client.
lease
This command configures the duration of the lease for an IP address that is assigned from a DHCP
server to a DHCP client. The overall lease time should be between 1-86400 minutes. If you specify
infinite, the lease is set for 60 days. You can also specify a lease duration. Days is an integer
from 0 to 59. Hours is an integer from 0 to 23. Minutes is an integer from 0 to 59.
Format no hardware-address
Mode DHCP Pool Config
Default none
Format host <address> [{<mask> | <prefix-length>}]
Mode DHCP Pool Config
Format no host
Mode DHCP Pool Config
Default 1 (day)
Format lease [{<days> [<hours>] [<minutes>] | infinite}]
Mode DHCP Pool Config
Page view 366
1 2 ... 362 363 364 365 366 367 368 369 370 371 372 ... 578 579

Comments to this Manuals

No comments