Netgear XSM7224S User Manual download pdf (Page 402)

100

101

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0

Utility Commands 6-78

v1.0, November 2010

debug rip packet

This command turns on tracing of RIP requests and responses. This command takes no options.

The output is directed to the log file.

A sample output of the trace message is shown below.

<15> JAN 01 00:35:15 192.168.17.29-1 RIP[181783160]: rip_map_debug.c(96) 775 %

Pkt RX on Intf: 1/0/1(1), Src_IP:43.1.1.1 Dest_IP:43.1.1.2

Rip_Version: RIPv2 Packet_Type:RIP_RESPONSE

ROUTE 1): Network: 10.1.1.0 Mask: 255.255.255.0 Metric: 1

ROUTE 2): Network: 40.1.0.0 Mask: 255.255.0.0 Metric: 1

ROUTE 3): Network: 10.50.50.0 Mask: 255.255.255.0 Metric: 1

ROUTE 4): Network: 41.1.0.0 Mask: 255.255.0.0 Metric: 1

ROUTE 5): Network:42.0.0.0 Mask:255.0.0.0 Metric:1

Another 6 routes present in packet not displayed.

The following parameters are displayed in the trace message:

Default disabled

Format debug rip packet

Mode Privileged EXEC

Parameter Definition

TX/RX TX refers to a packet transmitted by the device. RX refers to packets received by the

device.

Intf The interface that the packet came in or went out on. Format used is unit/slot/port (internal

interface number). Unit is always shown as 1 for interfaces on a non-stacking device.

Src_IP The source IP address in the IP header of the packet.

Dest_IP The destination IP address in the IP header of the packet.

Rip_Version RIP version used <RIPv1 or RIPv2>.

Packet_Type Type of RIP packet. <RIP_REQUEST or RIP_RESPONSE>.

Routes Up to 5 routes in the packet are displayed in the following format:

Network: <a.b.c.d> Mask <a.b.c.d> Next_Hop <a.b.c.d> Metric <a>

The next hop is only displayed if it is different from 0.0.0.0.

For RIPv1 packets, Mask is always 0.0.0.0.

Number of

routes not

printed

Only the first five routes present in the packet are included in the trace. There is another

notification of the number of additional routes present in the packet that were not included

in the trace.

1 2 ... 397 398 399 400 401 402 403 404 405 406 407 ... 578 579

Comments to this Manuals

No comments

Netgear XSM7224S User Manual Page 402

Comments to this Manuals

Related products and manuals for Software Netgear XSM7224S