Netgear XSM7224S User Manual download pdf (Page 26)

100

101

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0

Stacking Commands 2-2

v1.0, November 2010

member

This command configures a switch. The <unit> is the switch identifier of the switch to be

added/removed from the stack. The <switchindex> is the index into the database of the

supported switch types, indicating the type of the switch being preconfigured. The switch index is

a 32-bit integer. This command is executed on the Primary Management Unit.

no member

This command removes a switch from the stack. The <unit> is the switch identifier of the

switch to be removed from the stack. This command is executed on the Primary Management Unit.

switch priority

This command configures the ability of a switch to become the Primary Management Unit. The

<unit> is the switch identifier. The <value> is the preference parameter that allows the user

to specify, priority of one backup switch over another. The range for priority is 1 to 15. The switch

with the highest priority value will be chosen to become the Primary Management Unit if the

Format stack

Mode Global Config

Format member <unit> <switchindex>

Mode Stack Global Config

Note: Switch index can be obtained by executing the show supported switchtype

command in User EXEC mode.

Format no member <unit>

Mode Stack Global Config

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 578 579

Comments to this Manuals

No comments

Netgear XSM7224S User Manual Page 26

Comments to this Manuals

Related products and manuals for Software Netgear XSM7224S