Netgear XSM7224S User Manual download pdf (Page 256)

100

101

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0

Routing Commands 4-10

v1.0, November 2010

entered into the forwarding database. By specifying the preference of a static route, you control

whether a static route is more or less preferred than routes from dynamic routing protocols. The

preference also controls whether a static route is more or less preferred than other static routes to

the same destination. A route with a preference of 255 cannot be used to forward traffic.

For the static routes to be visible, you must perform the following steps:

• Enable ip routing globally.

• Enable ip routing for the interface.

• Confirm that the associated link is also up.

no ip route

This command deletes a single next hop to a destination static route. If you use the

<nexthopip> parameter, the next hop is deleted. If you use the <preference> value, the

preference value of the static route is reset to its default.

ip route default

This command configures the default route. The value for <nexthopip> is a valid IP address of

the next hop router. The <preference> is an integer value from 1 to 255. A route with a

preference of 255 cannot be used to forward traffic.

Default preference—1

Format ip route <ipaddr> <subnetmask> [<nexthopip> | Null0] [<preference>]

Mode Global Config

Format no ip route <ipaddr> <subnetmask> [{<nexthopip> [<preference>] |

Null0}]

Mode Global Config

Default preference—1

Format ip route default <nexthopip> [<preference>]

Mode Global Config

1 2 ... 251 252 253 254 255 256 257 258 259 260 261 ... 578 579

Comments to this Manuals

No comments

Netgear XSM7224S User Manual Page 256

Comments to this Manuals

Related products and manuals for Software Netgear XSM7224S