Netgear XSM7224S User Manual Page 39

  • Download
  • Add to my manuals
  • Print
  • Page
    / 579
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 38
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Stacking Commands 2-15
v1.0, November 2010
Delete image
Update bootcode
Clear config
A reboot operation is allowed during stack firmware synchronization.
If the firmware is corrupted during stack firmware synchronization, manual intervention by the
administrator is required to restore the switch to working condition.
During stack firmware synchronization, traps are generated on start, completion, or failure.
Note:
Non-deterministic upgrade behavior
On bootup, the image that gets synchronized depends on the one that becomes the manager.
Which code version the new stack synchronizes to is fully deterministic, but might not be
obvious to the user as it depends entirely on which unit becomes the manager. This might be
decided by a MAC address comparison. If the administrator wants a particular version to be
used by the stack, he should first ensure that this particular unit becomes stack manager.
Bootcode Upgrades
Bootcode upgrades are not initiated by the stack firmware synchronization.
boot auto-copy-sw
This command enables or disables stack firmware synchronization.
no boot auto-copy-sw
This command disables stack firmware synchronization.
Default Disabled
Format boot auto-copy-sw
Mode Privileged EXEC
Format no boot auto-copy-sw
Mode Privileged EXEC
Page view 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 578 579

Comments to this Manuals

No comments