Netgear XSM7224S User Manual download pdf (Page 301)

100

101

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0

Quality of Service (QoS) Commands 5-27

v1.0, November 2010

no service-policy

This command detaches a policy from an interface in the inbound direction. The <policyname>

parameter is the name of an existing DiffServ policy.

DiffServ Show Commands

Use the DiffServ show commands to display configuration and status information for classes,

policies, and services. You can display DiffServ information in summary or detailed formats. The

status information is only shown when the DiffServ administrative mode is enabled.

show class-map

This command displays all configuration information for the specified class. The <class-

name> is the name of an existing DiffServ class.

If the class-name is specified the following fields are displayed:

Note: This command causes a service to remove its reference to the policy. This

command effectively disables DiffServ on an interface in the inbound direction.

There is no separate interface administrative 'mode' command for DiffServ.

Format no service-policy in <policymapname>

Modes • Global Config

• Interface Config

Format show class-map <class-name>

Modes • Privileged EXEC

• User EXEC

Term Definition

Class Name The name of this class.

Class Type A class type of ‘all’ means every match criterion defined for the class is evaluated

simultaneously and must all be true to indicate a class match.

Class Layer3

Protocol

The Layer 3 protocol for this class. Possible values are IPv4 and IPv6.

1 2 ... 296 297 298 299 300 301 302 303 304 305 306 ... 578 579

Comments to this Manuals

No comments

Netgear XSM7224S User Manual Page 301

Comments to this Manuals

Related products and manuals for Software Netgear XSM7224S