Netgear XSM7224S User Manual download pdf (Page 407)

100

101

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0

Utility Commands 6-83

v1.0, November 2010

sFlow Commands

sFlow

is the standard for monitoring high-speed switched and routed networks. sFlow technology

is built into network equipment and gives complete visibility into network activity, enabling

effective management and control of network resources.

sflow receiver

Use this command to configure the sFlow collector parameters (owner string, receiver timeout,

max datagram size, IP address, and port).

Cable Length If this feature is supported by the PHY for the current link speed, the cable length is

displayed as a range between the shortest estimated length and the longest estimated

length. Note that if the link is down and a cable is attached to a 10/100 Ethernet adapter,

then the cable status may display as Open or Short because some Ethernet adapters

leave unused wire pairs unterminated or grounded. Unknown is displayed if the cable

length could not be determined.

Format sflow receiver <rcvr_idx> owner <owner-string> timeout <rcvr_timeout>

max datagram <size> ip/ipv6 <ip> port <port>

Mode Global Config

Field Description

Receiver Owner The identity string for the receiver, the entity making use of this sFlowRcvrTable entry. The

range is 127 characters. The default is a null string. The empty string indicates that the

entry is currently unclaimed and the receiver configuration is reset to the default values.

An entity wishing to claim an sFlowRcvrTable entry must ensure that the entry is

unclaimed before trying to claim it. The entry is claimed by setting the owner string to a

non-null value. The entry must be claimed before assigning a receiver to a sampler or

poller.

Receiver

Timeout

The time, in seconds, remaining before the sampler or poller is released and stops

sending samples to receiver. A management entity wanting to maintain control of the

sampler is responsible for setting a new value before the old one expires. The allowed

range is 0-4294967295 seconds. The default is zero (0).

Field Description

1 2 ... 402 403 404 405 406 407 408 409 410 411 412 ... 578 579

Comments to this Manuals

No comments

Netgear XSM7224S User Manual Page 407

Comments to this Manuals

Related products and manuals for Software Netgear XSM7224S