Netgear XSM7224S User Manual download pdf (Page 257)

100

101

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0

Routing Commands 4-11

v1.0, November 2010

no ip route default

This command deletes all configured default routes. If the optional <nexthopip> parameter is

designated, the specific next hop is deleted from the configured default route and if the optional

preference value is designated, the preference of the configured default route is reset to its default.

ip route distance

This command sets the default distance (preference) for static routes. Lower route distance values

are preferred when determining the best route. The ip route and ip route default

commands allow you to optionally set the distance (preference) of an individual static route. The

default distance is used when no distance is specified in these commands. Changing the default

distance does not update the distance of existing static routes, even if they were assigned the

original default distance. The new default distance will only be applied to static routes created

after invoking the ip route distance command.

no ip route distance

This command sets the default static route preference value in the router. Lower route preference

values are preferred when determining the best route.

ip netdirbcast

This command enables the forwarding of network-directed broadcasts. When enabled, network

directed broadcasts are forwarded. When disabled they are dropped.

Format no ip route default [{<nexthopip> | <preference>}]

Mode Global Config

Default 1

Format ip route distance <1-255>

Mode Global Config

Format no ip route distance

Mode Global Config

Default disabled

1 2 ... 252 253 254 255 256 257 258 259 260 261 262 ... 578 579

Comments to this Manuals

No comments

Netgear XSM7224S User Manual Page 257

Comments to this Manuals

Related products and manuals for Software Netgear XSM7224S