Netgear XSM7224S User Manual download pdf (Page 480)

100

101

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0

Management Commands 7-64

v1.0, November 2010

no radius server msgauth

The

no version of this command disables the message authenticator attribute to be used for the

specified RADIUS Authenticating server.

radius server primary

This command specifies a configured server that should be the primary server in the group of

servers which have the same server name. Multiple primary servers can be configured for each

number of servers that have the same name. When the RADIUS client has to perform transactions

with an authenticating RADIUS server of specified name, the client uses the primary server that

has the specified server name by default. If the RADIUS client fails to communicate with the

primary server for any reason, the client uses the backup servers configured with the same server

name. These backup servers are identified as the ‘Secondary’ type.

radius server retransmit

This command configures the global parameter for the RADIUS client that specifies the number of

transmissions of the messages to be made before attempting the fall back server upon unsuccessful

communication with the current RADIUS authenticating server. When the maximum number of

retries are exhausted for the RADIUS accounting server and no response is received, the client

does not communicate with any other server.

Format no radius server msgauth <ipaddr|dnsname>

Mode Global Config

Format radius server primary {<ipaddr|dnsname>}

Mode Global Config

Field Description

ip addr The IP address of the RADIUS Authenticating server.

dnsname The DNS name of the server.

Default 4

Format radius server retransmit <retries>

Mode Global Config

1 2 ... 475 476 477 478 479 480 481 482 483 484 485 ... 578 579

Comments to this Manuals

No comments

Netgear XSM7224S User Manual Page 480

Comments to this Manuals

Related products and manuals for Software Netgear XSM7224S