Netgear XSM7224S User Manual Page 515

  • Download
  • Add to my manuals
  • Print
  • Page
    / 579
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 514
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Log Messages 8-17
v1.0, November 2010
Routing/IPv6 Routing
Table 8-35: CoS Log Message
Component Message Cause
COS cosCnfgrInitPhase3Process: Unable to
apply saved config -- using factory defaults
The COS component was unable to apply
the saved configuration and has initialized to
the factory default settings.
Table 8-36: DiffServ Log Messages
Component Message Cause
DiffServ diffserv.c 165: diffServRestore Failed to
reset DiffServ. Recommend resetting device
While attempting to clear the running
configuration an error was encountered in
removing the current settings. This may
lead to an inconsistent state in the system
and resetting is advised.
DiffServ Policy invalid for service intf: "policy name,
intIfNum x, direction y
The DiffServ policy definition is not
compatible with the capabilities of the
interface specified. Check the platform
release notes for information on
configuration limitations.
Table 8-37: DHCP Relay Log Messages
Component Message Cause
DHCP relay REQUEST hops field more than config value The DHCP relay agent has processed a
DHCP request whose HOPS field is larger
than the maximum value allowed. The relay
agent will not forward a message with a hop
count greater than 4.
DHCP relay Request's seconds field less than the config
value
The DHCP relay agent has processed a
DHCP request whose SECS field is larger
than the configured minimum wait time
allowed.
DHCP relay processDhcpPacket: invalid DHCP packet
type: %u\n
The DHCP relay agent has processed an
invalid DHCP packet. Such packets are
discarded by the relay agent.
Page view 514
1 2 ... 510 511 512 513 514 515 516 517 518 519 520 ... 578 579

Comments to this Manuals

No comments