Netgear XSM7224S User Manual download pdf (Page 518)

100

101

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0

Log Messages 8-20

v1.0, November 2010

Table 8-41: VRRP Log Messages

Component Message Cause

VRRP Changing priority to 255 for virtual router

with VRID 1 on interface 1/0/1

When the router is configured with the

address being used as the virtual router ID,

the router’s priority is automatically set to the

maximum value to ensure that the address

owner becomes the VRRP master.

VRRP Changing priority to 100 for virtual router

with VRID 1 on interface 1/0/1

When the router is no longer the address

owner, Switch CLI reverts the router’s

priority to the default.

VRRP vrrpPacketValidate: Invalid TTL VRRP ignored an incoming message whose

time to live (TTL) in the IP header was not

255.

Table 8-42: ARP Log Message

Component Message Cause

ARP ARP received mapping for IP address xxx

to MAC address yyy. This IP address may

be configured on two stations.

When we receive an ARP response with

different MAC address from another station

with the same IP address as ours. This

might be a case of misconfiguration.

Table 8-43: RIP Log Message

Component Message Cause

RIP RIP : discard response from xxx via

unexpected interface

When RIP response is received with a

source address not matching the incoming

interface’s subnet.

Table 8-44: DHCP6 Log Message

Component Message Cause

DHCP6 relay_to_server: Cannot relay to relay server

intf xxx: not IPv6 enabled

Relay is enabled but neither the outgoing

interface nor the server IP address is

specified.

1 2 ... 513 514 515 516 517 518 519 520 521 522 523 ... 578 579

Comments to this Manuals

No comments

Netgear XSM7224S User Manual Page 518

Comments to this Manuals

Related products and manuals for Software Netgear XSM7224S