Netgear XSM7224S User Manual download pdf (Page 285)

100

101

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0

Quality of Service (QoS) Commands 5-11

v1.0, November 2010

diffserv

This command sets the DiffServ operational mode to active. While disabled, the DiffServ

configuration is retained and can be changed, but it is not activated. When enabled, DiffServ

services are activated.

no diffserv

This command sets the DiffServ operational mode to inactive. While disabled, the DiffServ

configuration is retained and can be changed, but it is not activated. When enabled, DiffServ

services are activated.

DiffServ Class Commands

Use the DiffServ class commands to define traffic classification. To classify traffic, you specify

Behavior Aggregate (BA), based on DSCP and Multi-Field (MF) classes of traffic (name, match

criteria)

This set of commands consists of class creation/deletion and matching, with the class match

commands specifying Layer 3, Layer 2, and general match criteria. The class match criteria are

also known as class rules, with a class definition consisting of one or more rules to identify the

traffic that belongs to the class.

The CLI command root is class-map.

Format diffserv

Mode Global Config

Format no diffserv

Mode Global Config

Note: Once you create a class match criterion for a class, you cannot change or delete the

criterion. To change or delete a class match criterion, you must delete and re-create

the entire class.

1 2 ... 280 281 282 283 284 285 286 287 288 289 290 ... 578 579

Comments to this Manuals

No comments

Netgear XSM7224S User Manual Page 285

Comments to this Manuals

Related products and manuals for Software Netgear XSM7224S