Netgear XSM7224S User Manual Page 371

  • Download
  • Add to my manuals
  • Print
  • Page
    / 579
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 370
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Utility Commands 6-47
v1.0, November 2010
no next-server
This command removes the boot server list.
option
The option command configures DHCP Server options. The <code> parameter specifies the
DHCP option code and ranges from 1-254. The <ascii string> parameter specifies an NVT
ASCII character string. ASCII character strings that contain white space must be delimited by
quotation marks. The hex <string> parameter specifies hexadecimal data. In hexadecimal,
character strings are two hexadecimal digits. You can separate each byte by a period (for example,
a3.4f.22.0c), colon (for example, a3:4f:22:0c), or white space (for example, a3 4f 22
0c).
no option
This command removes the DHCP Server options. The <code> parameter specifies the DHCP
option code.
ip dhcp excluded-address
This command specifies the IP addresses that a DHCP server should not assign to DHCP clients.
Low-address and high-address are valid IP addresses; each made up of four decimal bytes ranging
from 0 to 255. IP address 0.0.0.0 is invalid.
Format no next-server
Mode DHCP Pool Config
Default none
Format option <code> {ascii string | hex <string1> [<string2>...<string8>] |
ip <address1> [<address2>...<address8>]}
Mode DHCP Pool Config
Format no option <code>
Mode DHCP Pool Config
Default none
Page view 370
1 2 ... 366 367 368 369 370 371 372 373 374 375 376 ... 578 579

Comments to this Manuals

No comments