Netgear XSM7224S User Manual download pdf (Page 421)

100

101

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0

Management Commands 7-5

v1.0, November 2010

network protocol

This command specifies the network configuration protocol to be used. If you modify this value,

change is effective immediately. If you use the bootp parameter, the switch periodically sends

requests to a BootP server until a response is received. If you use the dhcp parameter, the switch

periodically sends requests to a DHCP server until a response is received. If you use the none

parameter, you must configure the network information for the switch manually.

network mac-address

This command sets locally administered MAC addresses. The following rules apply:

• Bit 6 of byte 0 (called the U/L bit) indicates whether the address is universally administered

(b'0') or locally administered (b'1').

• Bit 7 of byte 0 (called the I/G bit) indicates whether the destination address is an individual

address (b'0') or a group address (b'1').

• The second character, of the twelve character macaddr, must be 2, 6, A or E.

A locally administered address must have bit 6 On (b'1') and bit 7 Off (b'0').

network mac-type

This command specifies whether the switch uses the burned in MAC address or the locally-

administered MAC address.

Default none

Format network protocol {none | bootp | dhcp}

Mode Privileged EXEC

Format network mac-address <macaddr>

Mode Privileged EXEC

Default burnedin

Format network mac-type {local | burnedin}

Mode Privileged EXEC

1 2 ... 416 417 418 419 420 421 422 423 424 425 426 ... 578 579

Comments to this Manuals

No comments

Netgear XSM7224S User Manual Page 421

Comments to this Manuals

Related products and manuals for Software Netgear XSM7224S