Netgear XSM7224S User Manual Page 391

  • Download
  • Add to my manuals
  • Print
  • Page
    / 579
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 390
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Utility Commands 6-67
v1.0, November 2010
no debug igmpsnooping receive
This command disables tracing of received IGMP Snooping packets.
debug ip acl
Use this command to enable debug of IP Protocol packets matching the ACL criteria.
no debug ip acl
Use this command to disable debug of IP Protocol packets matching the ACL criteria.
debug ip dvmrp packet
Use this command to trace DVMRP packet reception and transmission. receive traces only
received DVMRP packets and transmit traces only transmitted DVMRP packets. When neither
keyword is used in the command, then all DVMRP packet traces are dumped. Vital information
such as source address, destination address, control packet type, packet length, and the interface on
which the packet is received or transmitted is displayed on the console
Group Multicast group address in the IGMP header.
Format no debug igmpsnooping receive
Mode Privileged EXEC
Default disabled
Format debug ip acl <acl Number>
Mode Privileged EXEC
Format no debug ip acl <acl Number>
Mode Privileged EXEC
Default disabled
Format debug ip dvmrp packet [receive|transmit]
Mode Privileged EXEC
Parameter Definition
Page view 390
1 2 ... 386 387 388 389 390 391 392 393 394 395 396 ... 578 579

Comments to this Manuals

No comments