Netgear XSM7224S User Manual Page 344

  • Download
  • Add to my manuals
  • Print
  • Page
    / 579
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 343
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Utility Commands 6-20
v1.0, November 2010
no logging console
This command disables logging to the console.
logging host
This command enables logging to a host. You can configure up to eight hosts. The
<ipaddr|hostname> is the IP address of the logging host. The <addresstype> indicates
the type of address ipv4 or ipv6 or dns being passed. The <port> value is a port number from 1
to 65535. You can specify the <severitylevel> value as either an integer from 0 to 7 or
symbolically through one of the following keywords: emergency (0), alert (1), critical
(2), error (3), warning (4), notice (5), info (6), or debug (7).
logging host remove
This command disables logging to host. See “show logging hosts” on page 6-22 for a list of host
indexes.
logging syslog
This command enables syslog logging. The <portid> parameter is an integer with a range of 1-
65535.
Format no logging console
Mode Global Config
Default port—514
level—critical (2)
Format logging host <ipaddr|hostname> <addresstype>
[<port>][<severitylevel>]
Mode Global Config
Format logging host remove <hostindex>
Mode Global Config
Default disabled
Format logging syslog [port <portid>]
Mode Global Config
Page view 343
1 2 ... 339 340 341 342 343 344 345 346 347 348 349 ... 578 579

Comments to this Manuals

No comments