Netgear XSM7224S User Manual download pdf (Page 286)

100

101

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0

Quality of Service (QoS) Commands 5-12

v1.0, November 2010

class-map

This command defines a DiffServ class of type match-all. When used without any match

condition, this command enters the class-map mode. The <class-map-name> is a case

sensitive alphanumeric string from 1 to 31 characters uniquely identifying an existing DiffServ

class.

The class type of match-all indicates all of the individual match conditions must be true for a

packet to be considered a member of the class.This command may be used without specifying a

class type to enter the Class-Map Config mode for an existing DiffServ class.

no class-map

This command eliminates an existing DiffServ class. The <class-map-name> is the name of

an existing DiffServ class. (The class name ‘default’ is reserved and is not allowed here.) This

command may be issued at any time; if the class is currently referenced by one or more policies or

by any other class, the delete action fails.

Note: The class-map-name 'default' is reserved and must not be used.

Note: The optional keywords [{ipv4 | ipv6}] specify the Layer 3 protocol for this

class. If not specified, this parameter defaults to ‘ipv4’. This maintains

backward compatibility for configurations defined on systems before IPv6 match

items were supported.

Note: The CLI mode is changed to Class-Map Config or Ipv6-Class-Map Config when

this command is successfully executed depending on the [{ipv4 | ipv6}]

keyword specified.

Format class-map match-all <class-map-name> [{ipv4 | ipv6}]

Mode Global Config

Format no class-map <class-map-name>

Mode Global Config

1 2 ... 281 282 283 284 285 286 287 288 289 290 291 ... 578 579

Comments to this Manuals

No comments

Netgear XSM7224S User Manual Page 286

Comments to this Manuals

Related products and manuals for Software Netgear XSM7224S