Netgear XSM7224S User Manual Page 180

  • Download
  • Add to my manuals
  • Print
  • Page
    / 579
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 179
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-139
v1.0, November 2010
Example: The following shows example CLI display output for the command.
(Switch) #show ip arp inspection vlan 10-12
Source Mac Validation : Disabled
Destination Mac Validation : Disabled
IP Address Validation : Disabled
Vlan Configuration Log Invalid ACL Name Static flag
---- ------------- ----------- --------- ----------
10 Enabled Enabled H2 Enabled
11 Disabled Enabled
12 Enabled Disabled
show ip arp inspection statistics
Use this command to display the statistics of the ARP packets processed by Dynamic ARP
Inspection. Give the vlan-list argument and the command displays the statistics on all DAI-enabled
VLANs in that list. Give the single vlan argument and the command displays the statistics on that
VLAN. If no argument is included, the command lists a summary of the forwarded and dropped
ARP packets.
Term Definition
Source MAC
Validation
Displays whether Source MAC Validation of ARP frame is enabled or disabled.
Destination
MAC Validation
Displays whether Destination MAC Validation is enabled or disabled.
IP Address
Validation
Displays whether IP Address Validation is enabled or disabled.
VLAN The VLAN ID for each displayed row.
Configuration Displays whether DAI is enabled or disabled on the VLAN.
Log Invalid Displays whether logging of invalid ARP packets is enabled on the VLAN.
ACL Name The ARP ACL Name, if configured on the VLAN.
Static Flag If the ARP ACL is configured static on the VLAN.
Page view 179
1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 578 579

Comments to this Manuals

No comments