Netgear XSM7224S User Manual download pdf (Page 477)

100

101

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0

Management Commands 7-61

v1.0, November 2010

the authenticating and accounting servers are configured without a name, the command uses the

‘Default_RADIUS_Auth_Server’ and ‘Default_RADIUS_Acct_Server’ as the default names,

respectively. The same name can be configured for more than one authenticating servers and the

name should be unique for accounting servers. The RADIUS client allows the configuration of a

maximum 32 authenticating and accounting servers.

If you use the <auth> parameter, the command configures the IP address or hostname to use to

connect to a RADIUS authentication server. You can configure up to 3 servers per RADIUS client.

If the maximum number of configured servers is reached, the command fails until you remove one

of the servers by issuing the “no” form of the command. If you use the optional <port>

parameter, the command configures the UDP port number to use when connecting to the

configured RADIUS server. The <port> number range is 1 - 65535, with 1812 being the default

value.

If you use the <acct> token, the command configures the IP address or hostname to use for the

RADIUS accounting server. You can only configure one accounting server. If an accounting server

is currently configured, use the “no” form of the command to remove it from the configuration.

The IP address or hostname you specify must match that of a previously configured accounting

server. If you use the optional <port> parameter, the command configures the UDP port to use

when connecting to the RADIUS accounting server. If a <port> is already configured for the

accounting server, the new <port> replaces the previously configured <port>. The <port>

must be a value in the range 0 - 65535, with 1813 being the default.

Note: To re-configure a RADIUS authentication server to use the default UDP <port>,

set the <port> parameter to 1812.

Note: To re-configure a RADIUS accounting server to use the default UDP <port>, set

the <port> parameter to 1813.

Format radius server host {auth | acct} {<ipaddr|dnsname>} [name

<servername>] [port <0-65535>][server-type]

Mode Global Config

Field Description

ipaddr The IP address of the server.

1 2 ... 472 473 474 475 476 477 478 479 480 481 482 ... 578 579

Comments to this Manuals

No comments

Netgear XSM7224S User Manual Page 477

Comments to this Manuals

Related products and manuals for Software Netgear XSM7224S