Netgear XSM7224S User Manual Page 375

  • Download
  • Add to my manuals
  • Print
  • Page
    / 579
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 374
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Utility Commands 6-51
v1.0, November 2010
clear ip dhcp conflict
The command is used to clear an address conflict from the DHCP Server database. The server
detects conflicts using a ping. DHCP server clears all conflicts If the asterisk (*) character is used
as the address parameter.
show ip dhcp binding
This command displays address bindings for the specific IP address on the DHCP server. If no IP
address is specified, the bindings corresponding to all the addresses are displayed.
show ip dhcp global configuration
This command displays address bindings for the specific IP address on the DHCP server. If no IP
address is specified, the bindings corresponding to all the addresses are displayed.
Default none
Format clear ip dhcp conflict {<address> | *}
Mode Privileged EXEC
Format show ip dhcp binding [<address>]
Modes Privileged EXEC
User EXEC
Term Definition
IP address The IP address of the client.
Hardware
Address
The MAC Address or the client identifier.
Lease expiration The lease expiration time of the IP address assigned to the client.
Type The manner in which IP address was assigned to the client.
Format show ip dhcp global configuration
Modes Privileged EXEC
User EXEC
Term Definition
Service DHCP The field to display the status of dhcp protocol.
Page view 374
1 2 ... 370 371 372 373 374 375 376 377 378 379 380 ... 578 579

Comments to this Manuals

No comments