Netgear XSM7224S User Manual download pdf (Page 328)

100

101

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0

Utility Commands 6-4

v1.0, November 2010

boot autoinstall retry-count

This command is used to set the number of attempts to download a configuration. The valid range

is from 1 to 6.

no boot autoinstall retry-count

This command is used to reset the number to the default. The default number is 3.

Dual Image Commands

The software supports a dual image feature that allows the switch to have two software images in

the permanent storage. You can specify which image is the active image to be loaded in

subsequent reboots. This feature allows reduced down-time when you upgrade or downgrade the

software.

delete

This command deletes the supplied image file from the permanent storage. The image to be

deleted must be a backup image. If this image is the active image, or if this image is activated, an

error message displays. The optional <unit> parameter is valid only on Stacks. Error will be

returned, if this parameter is provided, on Standalone systems. In a stack, the <unit> parameter

identifies the node on which this command must be executed. When this parameter is not supplied,

the command is executed on all nodes in a Stack.

Default 3

Format boot autoinstall retry-count

Mode Privileged EXEC

Format no boot autoinstall retry-count

Mode Privileged EXEC

Format delete [<unit>] {image1 | image2}

Mode Privileged EXEC

1 2 ... 323 324 325 326 327 328 329 330 331 332 333 ... 578 579

Comments to this Manuals

No comments

Netgear XSM7224S User Manual Page 328

Comments to this Manuals

Related products and manuals for Software Netgear XSM7224S