Netgear XSM7224S User Manual Page 30

  • Download
  • Add to my manuals
  • Print
  • Page
    / 579
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 29
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Stacking Commands 2-6
v1.0, November 2010
Use this command when installing or removing cards. If a card or other module is present in this
slot, the power mode is applied to the contents of the slot. If the slot is empty, the power mode is
applied to any card inserted into the slot.
no set slot power
This command unconfigures the power mode of the slot(s) and prohibits power from being
supplied to a card located in the slot. If you specify [all], the command prohibits power to all
slots, otherwise the command prohibits power to the slot identified by <unit/slot>.
Use this command when installing or removing cards. If a card or other module is present in this
slot, power is prohibited to the contents of the slot. If the slot is empty, power is prohibited to any
card inserted into the slot.
reload (Stack)
This command resets the entire stack or the identified <unit>. The <unit> is the switch
identifier. The system prompts you to confirm that you want to reset the switch.
show slot
This command displays information about all the slots in the system or for a specific slot.
Format set slot power [<unit/slot> | all]
Mode Global Config
Format no set slot power [<unit/slot> | all]
Mode Global Config
Format reload [<unit>]
Mode User EXEC
Format show slot [<unit/slot>]
Mode User EXEC
Page view 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 578 579

Comments to this Manuals

No comments