Netgear XSM7224S User Manual Page 92

  • Download
  • Add to my manuals
  • Print
  • Page
    / 579
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 91
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-51
v1.0, November 2010
no voice vlan (Global Config)
Use this command to disable the Voice VLAN capability on the switch.
voice vlan (Interface Config)
Use this command to enable the Voice VLAN capability on the interface.
You can configure Voice VLAN in one of three different ways:
no voice vlan (Interface Config)
Use this command to disable the Voice VLAN capability on the interface.
voice vlan data priority
Use this command to either trust or untrust the data traffic arriving on the Voice VLAN port.
Format no voice vlan
Mode Global Config
Default disabled
Format voice vlan {<id> | dot1p <priority> | none | untagged}
Mode Interface Config
Parameter Description
dot1p Configure the IP phone to use 802.1p priority tagging for voice traffic and to use the
default native VLAN (VLAN 0) to carry all traffic. Valid <priority> range is 0 to 7.
none Allow the IP phone to use its own configuration to send untagged voice traffic.
untagged Configure the phone to send untagged voice traffic.
Format no voice vlan
Mode Interface Config
Page view 91
1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 578 579

Comments to this Manuals

No comments