Netgear XSM7224S User Manual Page 204

  • Download
  • Add to my manuals
  • Print
  • Page
    / 579
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 203
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-163
v1.0, November 2010
no lldp timers
Use this command to return any or all timing parameters for local data transmission on ports
enabled for LLDP to the default values.
lldp transmit-tlv
Use this command to specify which optional type length values (TLVs) in the 802.1AB basic
management set are transmitted in the LLDPDUs. Use sys-name to transmit the system name
TLV. To configure the system name, see “snmp-server” on page 7-47. Use sys-descto transmit
the system description TLV. Use sys-cap to transmit the system capabilities TLV. Use port-
desc to transmit the port description TLV. To configure the port description, see See
“description” on page 3-5.
no lldp transmit-tlv
Use this command to remove an optional TLV from the LLDPDUs. Use the command without
parameters to remove all optional TLVs from the LLDPDU.
Format lldp timers [interval <interval-seconds>] [hold <hold-value>] [reinit
<reinit-seconds>
]
Mode Global Config
Format no lldp timers [interval] [hold] [reinit]
Mode Global Config
Default all optional TLVs are included
Format lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc]
Mode Interface Config
Format no lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc]
Mode Interface Config
Page view 203
1 2 ... 199 200 201 202 203 204 205 206 207 208 209 ... 578 579

Comments to this Manuals

No comments