Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 530)

100

101

Utility Commands

530

ProSafe M4100 and M7100 Managed Switches

bcmCNTR.0 0.20%

bcmLINK.0 0.35%

DHCP snoop 0.10%

Dynamic ARP Inspection 0.10%

dot1s_timer_task 0.10%

dhcpsPingTask 0.20%

show mbuf total

This command shows the total system buffer pools status.

Format

Mode

The following shows an example of CLI display output for the command.

(switch) #show mbuf total

mbufSize 9284 (0x2444)

Current Time 0x1897fa

MbufsFree 150

MbufsRxUsed 0

Total Rx Norm Alloc Attempts 26212

Total Rx Mid2 Alloc Attempts 4087

Total Rx Mid1 Alloc Attempts 188943

Total Rx High Alloc Attempts 384555

Total Tx Alloc Attempts 2478536

Total Rx Norm Alloc Failures 0

Total Rx Mid2 Alloc Failures 0

Total Rx Mid1 Alloc Failures 0

Total Rx High Alloc Failures 0

Total Tx Alloc Failures 0

show running-config

Use this command to display or capture the current setting of different protocol packages

supported on the switch. This command displays or captures commands with settings and

configurations that differ from the default value. To display or capture the commands with

settings and configurations that are equal to the default value, include the [all] option.

Note: Show running-config does not display the User Password, even if

you set one different from the default.

The output is displayed in the script format, which can be used to configure another switch

with same configuration. If the optional <scriptname> is provided with a file name

extension of “.scr”, the output is redirected to a script file.

show mbuf total

Privileged EXEC

1 2 ... 525 526 527 528 529 530 531 532 533 534 535 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 530

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+