Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 278)

100

101

Routing Commands

278

ProSafe M4100 and M7100 Managed Switches

authentication key must be 8 bytes or less if the authentication type is simple. If the type is

encrypt, the key might be up to 16 bytes. If the type is encrypt a <keyid> in the range of 0

and 255 must be specified. Unauthenticated interfaces do not need an authentication key or

authentication key ID. There is no default value for this command.

Format ip ospf authentication {none | {simple <key>} | {encrypt <key>

<keyid>}}

Mode

no ip ospf authentication

This command sets the default OSPF Authentication Type for the specified interface.

Format no ip ospf authentication

Mode

ip ospf cost

This command configures the cost on an OSPF interface. The <cost> parameter has a

range of 1–65,535.

Default

Format ip ospf cost <1-65535>

Mode

no ip ospf cost

This command configures the default cost on an OSPF interface.

Format no ip ospf cost

Mode

ip ospf database-filter all out

Use this command in Interface Configuration mode to disable OSPFv2 LSA flooding on an

interface.

Default

Format

ip ospf database-filter all out

Mode

Interface Config

Disabled

Interface Configuration

1 2 ... 273 274 275 276 277 278 279 280 281 282 283 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 278

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+