Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 529)

100

101

Utility Commands

529

ProSafe M4100 and M7100 Managed Switches

falling utilization threshold is optional. If the falling CPU utilization parameters are not

configured, they take the same value as the rising CPU utilization parameters.

Format

process cpu threshold type total rising <1-100> interval

<5-86400> {falling <1-100> interval <5-86400>}

Mode

show process cpu

This command provides the percentage utilization of the CPU by different tasks.

Note: It is not necessarily the traffic to the CPU, but different tasks that

keep the CPU busy.

The following shows example CLI display output.

(Switch) #show process cpu

Memory Utilization Report

status bytes

------ ----------

free 192980480

alloc 53409968

Task Utilization Report

Task Utilization

----------------------- -----------

bcmL2X.0 0.75%

Global Config

Parameter Description

rising threshold The percentage of CPU resources that, when exceeded for the configured rising interval,

triggers a notification. The range is 1–100. The default is 0 (disabled).

rising interval The duration of the CPU rising threshold violation, in seconds, that must be met to trigger a

notification. The range is 5–86,400. The default is 0 (disabled).

falling threshold The percentage of CPU resources that, when usage falls below this level for the configured

interval, triggers a notification. The range is 1–100. The default is 0 (disabled). A notification is

triggered when the total CPU utilization falls below this level for a configured period of time.

The falling utilization threshold notification is made only if a rising threshold notification was

previously done. The falling utilization threshold must always be equal or less than the rising

threshold value. The CLI does not allow setting the falling threshold to be greater than the

rising threshold.

falling interval The duration of the CPU falling threshold, in seconds, that must be met to trigger a

notification. The range is 5–86,400. The default is 0 (disabled).

Format show process cpu

Mode

Privileged EXEC

1 2 ... 524 525 526 527 528 529 530 531 532 533 534 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 529

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+