Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 553)

100

101

Utility Commands

553

ProSafe M4100 and M7100 Managed Switches

quit

This command closes the current telnet connection or resets the current serial connection.

The system asks you whether to save configuration changes before quitting.

Format quit

Modes

• Privileged EXEC

• User EXEC

reload

This command resets the switch without powering it off. Reset means that all network

connections are terminated and the boot code executes. The switch uses the stored

configuration to initialize the switch. You are prompted to confirm that the reset should

proceed. The LEDs on the switch indicate a successful reset.

Format reload

Mode

save

This command makes the current configuration changes permanent by writing the

configuration changes to system NVRAM.

Format save

Mode

copy

The copy command uploads and downloads files to and from the switch. You can also use

the copy command to manage the dual images (image1 and image2) on the file system.

Upload and download files from a server by using TFTP or Xmodem. SFTP and SCP are

available as additional transfer methods if the software package supports secure

management.

Format copy <source> <destination>

Mode

Replace the <source> and <destination> parameters with the options in table below.

For the <url> source or destination, use one of the following values:

{xmodem | tftp://<ipaddr|hostname>|<ip6address|hostname>/<filepath>/<filename> [noval]

| sftp|scp://<username>@<ipaddr>|<ipv6address>|<filepath>|<filename>}

Use the ias-users keyword to download the IAS user database file. When the IAS user’s file

is downloaded, the switch IAS user's database is replaced with the users and their attributes

in the downloaded file.

Privileged EXEC

1 2 ... 548 549 550 551 552 553 554 555 556 557 558 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 553

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+