Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 477)

100

101

Quality of Service (QoS) Commands

477

ProSafe M4100 and M7100 Managed Switches

no mac access-group

This command removes a MAC ACL identified by <name> from the interface in a given

direction.

Format no mac access-group <name> {{control-plane|in|out} vlan vlan-id

{in|out}}

Modes

• Global Config

• Interface Config

show mac access-lists

This command displays a MAC access list and all of the rules that are defined for the MAC

ACL. Use the [name] parameter to identify a specific MAC ACL to display.

Format show mac access-lists [name]

Mode

Rule Number

Action

Source MAC

Address

Destination

MAC Address

Ethertype

VLAN ID

COS

Log

Assign Queue

Mirror Interface

Redirect

Interface

Time Range

name

Rule Status

Privileged EXEC

Term Definition

The ordered rule number identifier defined within the MAC ACL.

The action associated with each rule. The possible values are Permit or Deny.

The source MAC address for this rule.

The destination MAC address for this rule.

The Ethertype keyword or custom value for this rule.

The VLAN identifier value or range for this rule.

The COS (802.1p) value for this rule.

Displays when you enable logging for the rule.

The queue identifier to which packets matching this rule are assigned.

The slot/port to which packets matching this rule are copied.

The slot/port to which packets matching this rule are forwarded.

Displays the name of the time-range if the MAC ACL rule has referenced a time range.

Status (Active/Inactive) of the MAC ACL rule

1 2 ... 472 473 474 475 476 477 478 479 480 481 482 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 477

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+