Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 59)

100

101

Switching Commands

ProSafe M4100 and M7100 Managed Switches

show vlan brief

This command displays a list of all configured VLANs.

Format show vlan brief

Mode

• Privileged EXEC

• User EXEC

VLAN ID

VLAN Name

VLAN Type

show vlan port

This command displays VLAN port information.

Format show vlan port {<slot/port> | all}

Mode

• Privileged EXEC

• User EXEC

Interface

Port VLAN ID

Acceptable

Frame Types

Ingress

Filtering

GVRP

Default Priority

Term Definition

There is a VLAN Identifier (vlanid) associated with each VLAN. The range of the VLAN

ID is 1–3965.

A string associated with this VLAN as a convenience. It can be up to 32 alphanumeric

characters long, including blanks.

The default is blank. VLAN ID 1 always has a name of

“Default.” This field is optional.

Type of VLAN, which can be Default (VLAN ID = 1) or static (one that is configured and

permanently defined), or a Dynamic (one that is created by GVRP registration).

Term Definition

Valid slot and port number separated by forward slashes. It is possible to set the

parameters for all ports by using the selectors on the top line.

The VLAN ID that this port will assign to untagged frames or priority tagged frames

received on this port.

The value must be for an existing VLAN. The factory default is 1.

The types of frames that may be received on this port. The options are 'VLAN only' and

'Admit

All'. When set to 'VLAN only', untagged frames or priority tagged frames received

on this port are discarded. When set to 'Admit All', untagged frames or priority tagged

frames received on this port are accepted and assigned the value of the Port VLAN ID for

this port. With either option, VLAN tagged frames are forwarded in accordance to the

802.1Q VLAN specification.

May be enabled or disabled. When enabled, the frame is discarded if this port is not a

member of the VLAN with which this frame is associated. In a tagged frame, the VLAN is

identified by the VLAN ID in the tag. In an untagged frame, the VLAN is the Port VLAN ID

specified for the port that received this frame. When disabled, all frames are forwarded in

accordance with the 802.1Q VLAN bridge specification.

The factory default is disabled.

May be enabled or disabled.

The 802.1p priority assigned to tagged packets arriving on the port.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 59

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+