Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 453)

100

101

Quality of Service (QoS) Commands

453

ProSafe M4100 and M7100 Managed Switches

This set of commands consists of class creation/deletion and matching, with the class match

commands specifying Layer 3, Layer 2, and general match criteria. The class match criteria

are also known as class rules, with a class definition consisting of one or more rules to

identify the traffic that belongs to the class.

Note: Once you create a class match criterion for a class, you cannot

change or delete the criterion. To change or delete a class match

criterion, you must delete and re-create the entire class.

The CLI command root is class-map.

class-map

This command defines a DiffServ class of type match-all. When used without any match

condition, this command enters the class-map mode. The <class-map-name> is a

case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying an existing

DiffServ class.

Note: The class-map-name default is reserved and must not be used.

The class type of match-all indicates all of the individual match conditions must be true for

a packet to be considered a member of the class. This command might be used without

specifying a class type to enter the Class-Map Config mode for an existing DiffServ class.

Note: The optional keywords [{ipv4 | ipv6}] specify the Layer 3

protocol for this class. If not specified, this parameter defaults to

ipv4. This maintains backward compatibility for configurations

defined on systems before IPv6 match items were supported.

Note: The CLI mode is changed to Class-Map Config or Ipv6-Class-Map

Config when this command is successfully executed depending on

the [{ipv4 | ipv6}] keyword specified.

Format class-map match-all <class-map-name> [{ipv4 | ipv6}]

Mode

Global Config

1 2 ... 448 449 450 451 452 453 454 455 456 457 458 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 453

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+