Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 49)

100

101

Switching Commands

ProSafe M4100 and M7100 Managed Switches

vlan acceptframe

This command sets the frame acceptance mode per interface. For VLAN Only mode,

untagged frames or priority frames received on this interface are discarded. For Admit All

mode, untagged frames or priority frames received on this interface are accepted and

assigned the value of the interface VLAN ID for this port. With either option, VLAN tagged

frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification.

Default

Format vlan acceptframe {untaggedonly | vlanonly | all}

Mode

no vlan acceptframe

This command resets the frame acceptance mode for the interface to the default value.

Format no vlan acceptframe

Mode

vlan ingressfilter

This command enables ingress filtering. If ingress filtering is disabled, frames received with

VLAN IDs that do not match the VLAN membership of the receiving interface are admitted

and forwarded to ports that are members of that VLAN.

Default

Format vlan ingressfilter

Mode

no vlan ingressfilter

This command disables ingress filtering. If ingress filtering is disabled, frames received with

VLAN IDs that do not match the VLAN membership of the receiving interface are admitted

and forwarded to ports that are members of that VLAN.

Format no vlan ingressfilter

Mode

all

Interface Config

disabled

Interface Config

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 49

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+