Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 181)

100

101

Switching Commands

181

ProSafe M4100 and M7100 Managed Switches

show lldp remote-device

Use this command to display summary information about remote devices that transmit

current LLDP data to the system. You can show information about LLDP remote data

received on all ports or on a specific port.

Format show lldp remote-device {<slot/port> | all}

Mode

Local Interface

RemID

Chassis ID

Port ID

System Name

Example: The following shows example CLI display output for the command.

(switch) #show lldp remote-device all

LLDP Remote Device Summary

Local

Interface RemID Chassis ID Port ID System Name

------- ------- -------------------- ------------------ ------------------

0/1

0/2

0/3

0/4

0/5

0/6

0/7 2 00:FC:E3:90:01:0F 00:FC:E3:90:01:11

0/7 3 00:FC:E3:90:01:0F 00:FC:E3:90:01:12

0/7 4 00:FC:E3:90:01:0F 00:FC:E3:90:01:13

0/7 5 00:FC:E3:90:01:0F 00:FC:E3:90:01:14

0/7 1 00:FC:E3:90:01:0F 00:FC:E3:90:03:11

0/7 6 00:FC:E3:90:01:0F 00:FC:E3:90:04:11

0/8

0/9

0/10

0/11

0/12

--More-- or (q)uit

Privileged EXEC

Term Definition

The interface that received the LLDPDU from the remote device.

An internal identifier to the switch to mark each remote device to the system.

The ID that is sent by a remote device as part of the LLDP message, it is usually a MAC

address of the device.

The port number that transmitted the LLDPDU.

The system name of the remote device.

1 2 ... 176 177 178 179 180 181 182 183 184 185 186 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 181

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+