Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 80)

100

101

Switching Commands

ProSafe M4100 and M7100 Managed Switches

no dot1x max-req

This command sets the maximum number of times the authenticator state machine on this

port will transmit an EAPOL EAP Request/Identity frame before timing out the supplicant.

Format no dot1x max-req

Mode

dot1x max-users

Use this command to set the maximum number of clients supported on the port when

MAC-based dot1x authentication is enabled on the port. The maximum users supported per

port is dependent on the product. The <count> value is in the range 1 - 48.

Default

Format dot1x max-users

<count>

Mode

no dot1x max-users

This command resets the maximum number of clients allowed per port to its default value.

Format no dot1x max-req

Mode

dot1x port-control

This command sets the authentication mode to use on the specified port. Select

force-unauthorized to specify that the authenticator PAE unconditionally sets the

controlled port to unauthorized. Select force-authorized to specify that the authenticator

PAE unconditionally sets the controlled port to authorized. Select auto to specify that the

authenticator PAE sets the controlled port mode to reflect the outcome of the authentication

exchanges between the supplicant, authenticator, and the authentication server. If the

mac-based option is specified, MAC-based dot1x authentication is enabled on the port.

Default

Format dot1x port-control {force-unauthorized | force-authorized | auto |

mac-based}

Mode

Interface Config

auto

Interface Config

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 80

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+