Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 527)

100

101

Utility Commands

527

ProSafe M4100 and M7100 Managed Switches

show mac-addr-table

This command displays the forwarding database entries. These entries are used by the

transparent bridging function to determine how to forward a received frame.

Enter all or no parameter to display the entire table. Enter a MAC Address and VLAN ID to

display the table entry for the requested MAC address on the specified VLAN. Enter the

count parameter to view summary information about the forwarding database table. Use the

interface <slot/port> parameter to view MAC addresses on a specific interface. Use

the vlan <vlan_id> parameter to display information about MAC addresses on a specified

VLAN.

Format show mac-addr-table [{<macaddr> <vlan_id> | all | count | interface

<slot/port> | vlan <vlan_id>}]

Mode

The following information displays if you do not enter a parameter, the keyword all, or the

MAC address and VLAN ID. If you enter vlan <vlan_id>, only the Mac Address, Interface,

and Status fields appear.

VLAN Deletes The number of VLANs on this switch that have been created and then deleted since the last

reboot.

Time Since

Counters Last

Cleared

The elapsed time, in days, hours, minutes, and seconds since the statistics for this switch were

last cleared.

Privileged EXEC

Term Definition

Mac Address

A unicast MAC address for which the switch has forwarding and or filtering information.

The format is 6 or 8 two-digit hexadecimal numbers that are separated by colons, for

example 01:23:45:67:89:AB. In an IVL system the MAC address will be displayed as

8 bytes.

Interface

The port through which this address was learned.

Term Definition

1 2 ... 522 523 524 525 526 527 528 529 530 531 532 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 527

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+