Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 408)

100

101

IPv6 Commands

408

ProSafe M4100 and M7100 Managed Switches

If you do not specify an IP address, a table with the following columns displays for all

neighbors or the neighbor associated with the interface that you specify:

Router ID

Priority

Intf ID

Interface

State

• Down- initial state of the neighbor conversation - no recent information has been

received from the neighbor

• Attempt - no recent information has been received from the neighbor but a more

concerted ef

fort should be made to contact the neighbor.

• Init - an Hello packet has recently been seen from the neighbor, but bidirectional

communication has not yet been established.

• 2 way - communication between the two routers is bidirectional.

• Exchange start - the first step in creating an adjacency between the two neighboring

routers, the goal is to decide which router is the master and to decide upon the initial

DD sequence number

• Exchange - the router is describing its entire link state database by sending Database

Description packets to the neighbor

• Full - the neighboring routers are fully adjacent and they will now appear in

router-LSAs and network-LSAs.

Dead Time

If you specify an IP address for the neighbor router, the following fields display:

Term Definition

The 4-digit dotted-decimal number of the neighbor router.

The OSPF priority for the specified interface. The priority of an interface is a priority

integer from 0 to 255.

A value of '0' indicates that the router is not eligible to become the

designated router on this network.

The interface ID of the neighbor.

The interface of the local router in slot/port format.

The state of the neighboring routers. The possible values are:

The amount of time, in seconds, to wait before the router assumes that the neighbor is

unreachable.

Term Definition

Interface

The interface of the local router in slot/port format.

Area ID

The area ID associated with the interface.

Options

An integer value that indicates the optional OSPF capabilities supported by the neighbor.

These are listed in its Hello packets.

This enables received Hello Packets to be rejected

(that is, neighbor relationships will not even start to form) if there is a mismatch in certain

crucial OSPF capabilities.

Router Priority

The router priority for the specified interface.

Dead Timer Due

The amount of time, in seconds, to wait before the router assumes that the neighbor is

unreachable.

State

The state of the neighboring routers.

1 2 ... 403 404 405 406 407 408 409 410 411 412 413 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 408

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+