Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 38)

100

101

Switching Commands

ProSafe M4100 and M7100 Managed Switches

are masked according to the 802.1s specification. This causes the priority to be rounded

down to the next lower valid priority.

Default

Format spanning-tree mst priority

Mode

no spanning-tree mst priority

This command sets the bridge priority for a specific multiple spanning tree instance to the

default value.

The parameter <mstid> is a number that corresponds to the desired existing

multiple spanning tree instance.

If 0 (defined as the default CIST ID) is passed as the <mstid>, this command sets the

Bridge Priority parameter for the Common and Internal Spanning

Tree to the default value.

Format no spanning-tree mst priority <mstid>

Mode

spanning-tree mst vlan

This command adds an association between a multiple spanning tree instance and one or

more VLANs so that the VLAN(s) are no longer associated with the Common and Internal

Spanning Tree. The parameter <mstid> is a number that corresponds to the desired

existing multiple spanning tree instance. The vlan range can be specified as a list or as a

range of values. To specify a list of VLANs, enter a list of VLAN IDs, each separated by a

comma with no spaces in between. To specify a range of VLANs, separate the beginning and

ending VLAN ID with a dash ("-").

Format spanning-tree mst vlan <mstid> <vlanid>

Mode

no spanning-tree mst vlan

This command removes an association between a multiple spanning tree instance and one

or more VLANs so that the VLAN(s) are again associated with the Common and Internal

Spanning T

ree.

Format no spanning-tree mst vlan <mstid> <vlanid>

Mode

32768

Global Config

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 38

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+