Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 670)

100

101

Management Commands

670

ProSafe M4100 and M7100 Managed Switches

clear aaa ias-users

Use this command to remove all users from the IAS database.

Format clear aaa ias-users

Mode

show aaa ias-users

Use this command to display configured IAS users and their attributes. Passwords

configured are not shown in the show command output.

Format show aaa ias-users

Mode

SNMP Commands

This section describes the commands you use to configure Simple Network Management

Protocol (SNMP) on the switch. You can configure the switch to act as an SNMP agent so

that it can communicate with SNMP managers on your network.

snmp-server

Use this command to set the name and the physical location of the switch and the

organization responsible for the network. The range for <name>, <loc> and <con> is from 1

to 31 alphanumeric characters.

Default

Format snmp-server {sysname <name> | location <loc> | contact <con>}

Mode

snmp-server community

Use this command to add (and name) a new SNMP community. A community <name> is a

name associated with the switch and with a set of SNMP managers that manage it with a

specified privileged level. The length of <name> can be up to 16 case-sensitive characters.

Note: Community names in the SNMP Community Table must be unique.

When making multiple entries using the same community name, the

first entry is kept and processed and all duplicate entries are

ignored.

Privileged EXEC

none

Global Config

1 2 ... 665 666 667 668 669 670 671 672 673 674 675 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 670

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+