Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 647)

100

101

Management Commands

647

ProSafe M4100 and M7100 Managed Switches

Access Commands

Use the commands in this section to close remote connections or to view information about

connections to the system.

disconnect

Use the disconnect command to close HTTP, HTTPS, Telnet, or SSH sessions. Use all

to close all active sessions, or use <session-id> to specify the session ID to close. To

view the possible values for <session-id>, use the show loginsession command.

Format disconnect {<session_id> | all}

Mode

show loginsession

Use this command to display current Telnet and serial port connections to the switch.

Format show loginsession

Mode

User Name

Connection

From

Idle Time

Session Time

Session Type

User Account Commands

This section describes the commands you use to add, manage, and delete system users.

The 7000 series software has two default users: admin and guest. The admin user can view

and configure system settings, and the guest user can view settings.

Note: You cannot delete the admin user. There is only one user allowed

with read/write privileges. You can configure up to five read-only

users on the system.

Privileged EXEC

Term Definition

The name the user entered to log on to the system.

IP address of the remote client machine or EIA-232 for the serial port connection.

Time this session has been idle.

Total time this session has been connected.

Shows the type of session, which can be HTTP, HTTPS, telnet, serial, or SSH.

1 2 ... 642 643 644 645 646 647 648 649 650 651 652 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 647

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+