Netgear Switch M4100-12G-POE+ User Manual Page 464

  • Download
  • Add to my manuals
  • Print
  • Page
    / 768
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 463
Quality of Service (QoS) Commands
464
ProSafe M4100 and M7100 Managed Switches
mark cos-as-sec-cos
This command marks outer VLAN tag priority bits of all packets as the inner VLAN tag
priority, marking CoS as Secondary CoS. This essentially means that the inner VLAN tag
CoS is copied to the outer VLAN tag CoS.
Format mark-cos-as-sec-cos
Mode
Incompatibilities
mark ip-dscp
This command marks all packets for the associated traffic stream with the specified IP DSCP
value.
The <dscpval> value is specified as either an integer from 0 to 63, or symbolically through
one of the following keywords: af11, af12, af13, af21, af22, af23, af31, af32, af33, af41, af42,
af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef.
Format mark ip-dscp <dscpval>
Mode
Incompatibilities
mark ip-precedence
This command marks all packets for the associated traffic stream with the specified IP
Precedence value. The IP Precedence value is an integer from 0 to 7.
Note: This command might not be used on IPv6 classes. IPv6 does not
have a precedence field.
Mode
Policy-Class-Map Config
Incompatibilities
Drop, Mark IP DSCP, IP Precedence, Police
Policy-Class-Map Config
Drop, Mark IP DSCP, IP Precedence, Police
Policy-Class-Map Config
Drop, Mark CoS, Mark IP Precedence, Police
Format mark ip-precedence <0-7>
Mode
Policy-Class-Map Config
Incompatibilitie
s
Drop, Mark CoS, Mark IP Precedence, Police
Policy Type
In
Page view 463
1 2 ... 459 460 461 462 463 464 465 466 467 468 469 ... 767 768

Comments to this Manuals

No comments