Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 74)

100

101

Switching Commands

ProSafe M4100 and M7100 Managed Switches

no set gvrp adminmode

This command disables GVRP.

Format no set gvrp adminmode

Mode

set gvrp interfacemode

This command enables GVRP on a single port (Interface Config mode) or all ports (Global

Config mode).

Default

Format set gvrp interfacemode

Mode

• Interface Config

• Global Config

no set gvrp interfacemode

This command disables GVRP on a single port (Interface Config mode) or all ports (Global

Config mode). If GVRP is disabled, Join

Time, Leave Time, and Leave All Time have no

effect.

Format no set gvrp interfacemode

Mode

• Interface Config

• Global Config

show gvrp configuration

This command displays Generic Attributes Registration Protocol (GARP) information for one

or all interfaces.

Format show gvrp configuration {<slot/port> | all}

Mode

• Privileged EXEC

• User EXEC

Privileged EXEC

disabled

Term Definition

Interface

Valid slot and port number separated by forward slashes.

Join Timer

The interval between the transmission of GARP PDUs registering (or re-registering)

membership for an attribute. Current attributes are a VLAN or multicast group.

There is

an instance of this timer on a per-Port, per-GARP participant basis. Permissible values

are 10–100 centiseconds (0.1 to 1.0 seconds). The factory default is 20 centiseconds

(0.2 seconds). The finest granularity of specification is one centisecond (0.01 seconds).

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 74

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+