Netgear Switch M4100-12G-POE+ User Manual Page 138

  • Download
  • Add to my manuals
  • Print
  • Page
    / 768
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 137
Switching Commands
138
ProSafe M4100 and M7100 Managed Switches
show ip dhcp snooping database
Use this command to display the DHCP Snooping configuration related to the database
persistency.
Format show ip dhcp snooping database
Mode
• Privileged EXEC
• User EXEC
Example: The following shows example CLI display output for the command.
(switch) #show ip dhcp snooping database
agent url: /10.131.13.79:/sai1.txt
write-delay: 5000
show ip dhcp snooping interfaces
Use this command to show the DHCP Snooping status of the interfaces.
Format show ip dhcp snooping interfaces
Mode
show ip dhcp snooping statistics
Use this command to list statistics for DHCP Snooping security violations on untrusted ports.
Format show ip dhcp snooping statistics
Mode
• Privileged EXEC
• User EXEC
Term Definition
Agent URL
Bindings database agent URL.
Write Delay
The maximum write time to write the database into local or remote.
Privileged EXEC
Term Definition
Interface
The IP address of the interface in slot/port format.
MAC Verify
Failures
Represents the number of DHCP messages that were filtered on an untrusted interface
because of source MAC address and client HW address mismatch.
Page view 137
1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 767 768

Comments to this Manuals

No comments