Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 467)

100

101

Quality of Service (QoS) Commands

467

ProSafe M4100 and M7100 Managed Switches

service-policy

This command attaches a policy to an interface in the inbound direction. The

<policyname> parameter is the name of an existing DiffServ policy. This command causes

a service to create a reference to the policy.

Note: This command effectively enables DiffServ on an interface in the

inbound direction. There is no separate interface administrative

'mode' command for DiffServ.

Note: This command fails if any attributes within the policy definition

exceed the capabilities of the interface. Once a policy is successfully

attached to an interface, any attempt to change the policy definition,

that would result in a violation of the interface capabilities, causes

the policy change attempt to fail.

Note: Each interface can have one policy attached.

no service-policy

This command detaches a policy from an interface in the inbound direction. The

<policyname> parameter is the name of an existing DiffServ policy.

Note: This command causes a service to remove its reference to the

policy. This command effectively disables DiffServ on an interface in

the inbound direction. There is no separate interface administrative

'mode' command for DiffServ.

Format service-policy {in|out} <policymapname>

Modes

• Global Config

• Interface Config

Format no service-policy in <policymapname>

Modes

• Global Config

• Interface Config

1 2 ... 462 463 464 465 466 467 468 469 470 471 472 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 467

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+