Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 696)

100

101

Management Commands

696

ProSafe M4100 and M7100 Managed Switches

no tacacs-server source interface

Use this command in Global Configuration mode to remove the global source interface

(Source IP selection) for all

TACACS+ communications between the TACACS+ client and

the server.

Format

no tacacs-server source-interface

Mode

tacacs-server timeout

Use the tacacs-server timeout command to set the timeout value for communication

with the TACACS+ servers. The <timeout> parameter has a range of 1-30 and is the

timeout value in seconds.

Default

Format tacacs-server timeout <timeout>

Mode

no tacacs-server timeout

Use the no tacacs-server timeout command to restore the default timeout value for all

ACACS servers.

Format no tacacs-server timeout

Mode

key

Use the key command in TACACS Configuration mode to specify the authentication and

encryption key for all TACACS communications between the device and the TACACS server.

This key must match the key used on the TACACS daemon. The <key-string> parameter

specifies the key name. For an empty string use “ ”. (Range: 0 - 128 characters).

Text-based configuration supports TACACS server’s secrets in encrypted and non-encrypted

format. When you save the configuration, these secret keys are stored in encrypted format

only

. If you want to enter the key in encrypted format, enter the key along with the encrypted

keyword. In the show running config command’s display, these secret keys are displayed in

encrypted format. You cannot show these keys in plain text format.

Format key [<key-string> | encrypted <key-string>]

Mode

Privileged Exec

Global Config

TACACS Config

1 2 ... 691 692 693 694 695 696 697 698 699 700 701 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 696

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+