Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 556)

100

101

Utility Commands

556

ProSafe M4100 and M7100 Managed Switches

write memory

Use this command to save running configuration changes to NVRAM so that the changes

you make will persist across a reboot. This command is the same as copy

system:running config nvram:startup-config.

Format write memory

Mode

Simple Network Time Protocol (SNTP) Commands

This section describes the commands you use to automatically configure the system time

and date by using SNTP.

sntp broadcast client poll-interval

This command sets the poll interval for SNTP broadcast clients in seconds as a power of two

where <poll-interval> can be a value from 6 to 10.

Default

Format sntp broadcast client poll-interval <poll-interval>

Mode

no sntp broadcast client poll-interval

This command resets the poll interval for SNTP broadcast client back to the default value.

Format no sntp broadcast client poll-interval

Mode

{image1 | image2} unit://<unit>/{image1 |

image2}

Copy an image from the management node to a given

node in a Stack. Use the unit parameter to specify the

node to which the image should be copied.

{image1 | image2}

unit://*/{image1 |

image2}

Copy an image from the management node to all of

the nodes in a Stack.

Privileged EXEC

Global Config

Source Destination Description

1 2 ... 551 552 553 554 555 556 557 558 559 560 561 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 556

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+