Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 548)

100

101

Utility Commands

548

ProSafe M4100 and M7100 Managed Switches

of the traceroute. This port should be an unused port on the destination system. The range

for <port> is zero (0) to 65535. The default value is 33434.

Default

Format traceroute ipv6 <ipv6-address|hostname> [port <port>]

Mode

clear config

This command resets the configuration to the factory defaults without powering off the switch.

When you issue this command, a prompt appears to confirm that the reset should proceed.

When you enter y, you automatically reset the current configuration on the switch to the

default values. It does not reset the switch.

Format clear config

Mode

clear eventlog

This command clears all event messages maintained in the switch.

Format clear eventlog

Mode

clear mac-addr-table

This command clears the dynamically learned MAC addresses of the switch.

Format clear mac-addr-table

Mode

clear logging buffered

This command clears the messages maintained in the system log.

Format clear logging buffered

Mode

port: 33434

Privileged EXEC

1 2 ... 543 544 545 546 547 548 549 550 551 552 553 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 548

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+