Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 493)

100

101

Quality of Service (QoS) Commands

493

ProSafe M4100 and M7100 Managed Switches

Note: The administrator has to enable tagging on auto-VoIP-enabled ports

to remark the voice data when it is egressed.

Format auto-voip protocol-based {remark <remark-priority> | traffic-class

<tc>}

Mode

• Global Config

• Interface Config

Default

no auto-voip protocol-based {remark | traffic-class}

This command is used to set the traffic-class to the default value.

Format no auto-voip protocol-based {remark <remark- priority> |

traffic-class <tc>}

Mode

• Global Config

• Interface Config

show auto-voip

Use this command to display the auto VoIP settings on the interface or interfaces of the switch.

Format show auto-voip {protocol-based|oui-based} interface {slot/port|all}

Mode

VoIP

Prioritize Type

Class Value

•

If the Prioritization Type is configured as traffic-class, this value is the

queue value.

• If the Prioritization Type is configured as remark, this value is 802.1p

priority used to remark the voice traffic.

Priority

AutoVoIPMode

Example 1: The following shows an example of a CLI display output for the command.

(switch)# show auto-voip protocol-based interface all

VoIP VLAN Id................................... 2

Prioritization Type............................ traffic-class

Class Value.................................... 7

Traffic-class 7

Privileged EXEC

Field Description

The global VoIP VLAN ID.

The type of prioritization used on voice traffic.

The 802.1p priority. This field is valid for OUI auto VoIP.

The Auto VoIP mode on the interface.

1 2 ... 488 489 490 491 492 493 494 495 496 497 498 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 493

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+