Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 457)

100

101

Quality of Service (QoS) Commands

457

ProSafe M4100 and M7100 Managed Switches

match dstip6

This command adds to the specified class definition a match condition based on the

destination IPv6 address of a packet.

Default

Format match dstip6 <destination-ipv6-prefix/prefix-length>

Mode

match dstl4port

This command adds to the specified class definition a match condition based on the

destination layer 4 port of a packet using a single keyword or numeric notation. To specify the

match condition as a single keyword, the value for <portkey> is one of the supported port

name keywords. The currently supported <portkey> values are: domain, echo, ftp, ftpdata,

http, smtp, snmp, telnet, tftp, www. Each of these translates into its equivalent port number.

To specify the match condition using a numeric notation, one layer 4-port number is required.

The port number is an integer from 0 to 65535.

Default

Format match dstl4port {<portkey> | <0-65535>}

Mode

match ip dscp

This command adds to the specified class definition a match condition based on the value of

the IP DiffServ Code Point (DSCP) field in a packet, which is defined as the high-order six

bits of the Service Type octet in the IP header (the low-order two bits are not checked).

The <dscpval> value is specified as either an integer from 0 to 63, or symbolically through

one of the following keywords: af1

1, af12, af13, af21, af22, af23, af31, af32, af33, af41, af42,

af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef.

Note: The ip dscp, ip precedence, and ip tos match conditions are

alternative ways to specify a match criterion for the same Service

Type field in the IP header, but with a slightly different user notation.

none

Ipv6-Class-Map Config

none

Class-Map Config

Ipv6-Class-Map Config

Default

none

Format match ip dscp <dscpval>

Mode

Class-Map Config

Ipv6-Class-Map Config

1 2 ... 452 453 454 455 456 457 458 459 460 461 462 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 457

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+