IPv6 Multicast Commands
427
ProSafe M4100 and M7100 Managed Switches
(Switch) #show ipv6 pim interface 0/1
Interface...................................... 0/1
Mode........................................... Dense
Hello Interval (secs).......................... 30
Join Prune Interval (secs)..................... 60
DR Priority.................................... 1
BSR Border..................................... Disabled
ipv6 pim bsr-border
Use this command to prevent bootstrap router (BSR) messages from being sent or received
through an interface.
Default
Format ipv6 pim bsr-border
Mode
no ipv6 pim bsr-border
Use this command to disable the interface from being the BSR border.
Format no ipv6 pim bsr-border
Mode
ipv6 pim bsr-candidate
Use this command to configure the router to announce its candidacy as a bootstrap router
(BSR).
Hello Interval
Hello interval value. The frequency at which PIM hello messages are transmitted on
this interface. By default, the value is 30 seconds.
Join-prune Interval
Join-prune interval value.
DR Priority
DR priority configured on this interface. This is not applicable if the interface mode is
Dense.
BSR Border
Indicates whether the interface is configured as a BSR border.
Neighbor Count
Number of PIM neighbors discovered on the interface. This field is displayed only
when the interface is operational.
Designated-Router
IP address of the elected DR on the interface. This field is displayed only when the
interface is operational.
disabled
Interface Config
Interface Config
Default
None
Term Definition
Comments to this Manuals