Netgear Switch M4100-12G-POE+ User Manual download pdf (Page 37)

100

101

Switching Commands

ProSafe M4100 and M7100 Managed Switches

If you specify cost, this command sets the path cost for this port within a multiple spanning

tree instance or the Common and Internal Spanning Tree instance, depending on the

<mstid> parameter, to the default value, that is, a path cost value based on the Link Speed.

If you specify external-cost, this command sets the external path cost for this port for mst ‘0’

instance, to the default value, that is, a path cost value based on the Link Speed.

If you specify port-priority, this command sets the priority for this port within a specific

multiple spanning tree instance or the Common and Internal Spanning

Tree instance,

depending on the <mstid> parameter, to the default value.

Format no spanning-tree mst <mstid> <cost | external-cost | port-priority>

Mode

spanning-tree mst instance

This command adds a multiple spanning tree instance to the switch. The parameter

<mstid> is a number within a range of 1–4094, that corresponds to the new instance ID to

be added. The maximum number of multiple instances supported by the switch is 4.

Default

Format spanning-tree mst instance <mstid>

Mode

no spanning-tree mst instance

This command removes a multiple spanning tree instance from the switch and reallocates all

VLANs allocated to the deleted instance to the Common and Internal Spanning

Tree. The

parameter <mstid> is a number that corresponds to the desired existing multiple spanning

tree instance to be removed.

Format no spanning-tree mst instance <mstid>

Mode

spanning-tree mst priority

This command sets the bridge priority for a specific multiple spanning tree instance. The

parameter <mstid> is a number that corresponds to the desired existing multiple spanning

tree instance. The priority value is a number within a range of 0–61440 in increments of

4096.

If you specify 0 (defined as the default CIST ID) as the <mstid>, this command sets the

Bridge Priority parameter to a new value for the Common and Internal Spanning

Tree. The

bridge priority value is a number within a range of 0–61440. The twelve least significant bits

Interface Config

none

Global Config

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 767 768

Comments to this Manuals

No comments

Netgear Switch M4100-12G-POE+ User Manual Page 37

Comments to this Manuals

Related products and manuals for Networking Netgear Switch M4100-12G-POE+